SBM Ultrafine Powder Tech provide you with a complete set of non-metallic mineral ultrafine powder grinding solutions.
Applicable Materials
The non-metallic minerals that the ultrafine powder technology mill can be used for processing are: limestone, feldspar, calcite, talc, barite, rare earth, marble, bauxite, dolomite, granite, kaolin, coal gangue, kyanite, fluorine Stone, bentonite, medical stone, rhyolite, chondrolite, pyrophyllite, shale, purple sandstone, stacked rock, basalt, gypsum, graphite, corundum, kyanite, wollastonite, asbestos, mica, zeolite , fluorite, limestone, quartz stone, sandstone, andalusite, mirabilite, rectorite, diatomite, refractory clay, attapulgite, etc.
Technical Guide
Mechanical ultrafine pulverization is one of the main processing technologies for ultrafine powders. It is of great significance to the development of the non-metallic ore ultrafine powder industry because of the advantages of the new type of equipment and the expansion of the output of ultrafine powder.
In the ultrafine powder deep processing process, the main equipment is ultrafine powder preparation equipment and classification equipment. HGM series ring roller micro-powder mill is an ultra-fine powder deep processing equipment launched by micro-powder technology. Ultrafine powder deep processing of ore.
Stable process, high fineness of finished products, low investment cost, high powder yield, low loss of parts, and environmental protection are the six performance advantages of HGM micro-powder mill, helping aerospace stealth materials, technical application ceramics, wave absorbing materials, functional fibers, Industrial production of high-tech industries such as environmental protection materials and biomedical materials.
Non-metallic Mineral Ultrafine Powder Grinding Plant Structure
1 Hammer Crusher
2 bucket elevator
3 silos
4 belt feeder
5Ultrafine mill
6 powder selection machine
7 Dust collectors
8 discharge ports
9 Screw Conveyors
10 induced draft fan
11 muffler
Technological Process
The first stage---raw material crushing section
The raw ore is unloaded into the crusher by a forklift or incoming truck and is crushed to a fineness (15mm-50mm) that can enter the mill.
The second stage---raw material grinding section
The raw materials with suitable particle size are continuously and uniformly sent to the main machine for grinding through the skirt belt feeder. The ground fine powder is sent to the classifier for classification under the action of the air flow of the fan. Enter the air outlet duct to enter the collection stage.
The third stage---raw material classification section
The dust gas from the mill enters the cyclone collector through the main air outlet pipe, and most of the finished fine powder is separated under the action of centrifugal force. The excess gas is discharged and sent to the pulse dust collector. After the pulse dust collector, it becomes clean gas and discharged. The finished product fine powder collected by the cloth bag is transported to the finished product conveying stage together by the screw conveyor.
The fourth stage---raw material collection section
The finished ore powder collected by the dust collector and the cyclone collector is sent to the next process or into the finished product tank by the screw conveyor.
Popular Ores
SBM Ultrafine Powder Tech is guided by market demand, absorbs stable production technology of pulverizers, and combines its own innovative design and manufacturing concepts. grading, its performance has reached a high level.
Main Products
YGM High Pressure Raymond Roller Grinding Mill
Maxing Feeding Size: 40 mm
Ouput Size: 613-33 micron (35-400mesh)
Capacity: 1-25 t/h
Applicable materials: Calcium carbonate, limestone, kaolin, limestone, calcite, marble, talcum, barite, gypsum, dolomite, bentonite mud, mica
Maxing Feeding Size: 20 mm
Ouput Size: 74-5 micron (200-2500 mesh)
Capacity: 0.5-45 t/h
Applicable materials: Calcium carbonate, limestone, kaolin, limestone, calcite, marble, talcum, barite, gypsum, dolomite, bentonite mud, mica, etc.
Maxing Feeding Size: 10 mm
Ouput Size: 74-5 micron (400-3000 mesh)
Capacity: 0.5-5.5 t/h
D97 < 4μm
D50 < 2μm
Applicable materials: calcite, marble, limestone, dolomite, barite, talc, kaolin, wollastonite, gypsum, feldspar, pyrophyllite etc.
Industry Use
Related Cases
